Products

DESCRIPTION

Basic Info

Product Description

Installation Guide:

Connection:

-Take Out The Wires From Pocket Inside The Gloves.

-Carefully Connect White Jumper With White Port & Black Jumper With Black.

Operation:

-Put Battery In Pocket, Upfront Angle On The Back Of Gloves, Where Button On The Battery Place On Day Wolf Logo. (For Reference See Instruction Image On Details page)

-One Button On Index Finger & One The Back Of The Hand On Battery Use Any Button To Switch On The Flashlight and Press Again to Adjust Heating Modes.

User Instructions:

Ø Charge The Batteries With or Without Removing From Glove's Wires Just Switched Off The Flashlight While Charging The Batteries.

Ø Put The Charging Port Upside The Pocket For Easy Charging.

Ø Charge The Battery For 1 to 2 Hours Until The Red Light Turns Green.

Ø Red Light illuminate While Charging.

Ø Green Light illuminate when Charging is Complete.

Ø Open the Battery Pocket inside the Gloves and Carefully Connect Black Wire with Black Connector and White Wire with White Connector.

Ø Put the Button Portion of Battery on the Upfront Side on Back of Gloves.

Ø Press Power Button Once to On & Press Again to Adjust Modes.

Ø It Is Recommended To Recharge The Battery At Least Once In Every Six Months To Keep It Usable (If product is not in use).

Ø For The Long Life of LED Gloves & Battery It Is Recommended to do not Plug & Unplug Battery Again and Again From Wires. Only Unplug When Don't Want To Use Gloves For Long Time.

Ø Remove Battery while Cleaning or Storing Gloves.

Ø Use Mild Detergent to Clean the Only the Spots and Air Dry Lying Flat.

Ø Hand wash is recommended for more safety.

Ø If Machine Wash then it is recommended to use sack bag to wash it.

Ø Do not Machine Dry or Use Bleach.